Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Vessel Incidents

#Vesselincidents - Within a fortnight two separate incidents involving a pair of vessels berthed in Warrenpoint, took place at the Co. Down port on the shore of Carlingford Lough.

Last week, overheating of cargo on board a hold of the M.V. Cimbris was detected by the vessel's captain who informed Warrenpoint Harbour Authority (WHA) which requested the fire brigade service.

The port authority implemented their emergency response plan and several units from the Northern Ireland Fire and Rescue Service were dispatched to the Cimbris which had arrived from Riga.

Peter Conway, CEO of the port authority confirmed that of the 3,000 tonnes of animal feed, 2000 tonnes had already been discharged prior to the incident on board the vessel whose berth was cordoned off for safety reasons.

Commenting on the incident, "I wish also to compliment the speed with which the emergency services responded to this incident".

The second incident as previously reported on Afloat.ie, had involved a small discharge of marine fuel from a vessel berthed at the port on 22 October.

The fuel was detected on the water's surface by the ship's captain who informed WHA which led to the port activating their oil contingency plan.

A team trained in oil spill recovery put in place around the vessel oil spill booms in addition to securing the affected area through the deployment of absorbent pads.

With a rising tide some oil had been detected along the shore adjacent to Narrow Water, the area was subsequently cleaned and oil residue removed as part of the port's contingency plan.

The Northern Ireland Environmental Agency, the Department of the Environment, Newry and Mourne District Council, the Loughs Agency and other agencies were informed. They assisted Warrenpoint Harbour in the remediation of the shore line at this location.

An investigation into the spill was instigated to determine the cause of the incident.

 

Published in Warrenpoint Port

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.