Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Fastcraft

#CancelledSailings - Due to adverse weather conditions, some ferry sailings across the Irish Sea have been cancelled today and some crossings tomorrow remain in doubt.

As previously reported on Afloat.ie, Irish Ferries new chartered ro-pax ferry 'Epsilon' which was due to debut on the Dublin-Holyhead route yesterday, had to cancel sailings due to operational reasons.

In addition fast-craft Dublin-Holyhead sailings operated by Jonathan Swift today have also been cancelled.

All passengers travelling with Irish Ferries will be accommodated alternatively on the cruiseferry Ulysses, for further details, visit the company's website here, noting status of sailings schedule for tomorrow (Thursday) are also updated.

For the most up to date information on all sailings times of ferry operators and how to contact them directly, the AA provides an updated live service.

Published in Ferry
Holidaymakers now have the added option of  fast-ferry sailings on Stena Line's Rosslare-Fishguard port route which is to resume tomorrow, writes Jehan Ashmore.
The high season service is operated by the fast-ferry Stena Lynx III which is marketed as the Stena 'Express' . The summertime service runs between 1 July - 4 September and the fast-ferry is scheduled to take 120 minutes for the crossing.
Stena Lynx III has a capacity for over 600 passengers and 120-cars, to see a virtual tour of the wave-piercing catamaran craft click HERE. Measuring 81m long the 4,113 gross tonnes craft was built in 1996 by fast-ferry specialists InCat in Hobart, Tasmania. In recent years she maintained sailings between Dun Laoghaire-Holyhead when the HSS Stena Explorer was temporily taken off service.

In addition to the 'Express' service the St. Georges Channel route is served by the year-round operated conventional ferry, Stena Europe (1981/24,828 grt). The 1,386 passenger / 564-vehicle ferry recently underwent a £2m refurbishment and takes a more leisurely passage time of 3 hours 30 minutes.

For information on both fast-ferry and conventional ferry sailing schedules click HERE.

Published in Ferry
With just over a fortnight to go to resumption of Stena Line's Dun Laoghaire-Holyhead fast-craft sailings on 1 April, the route to Wales is to see the larger HSS Stena Explorer return instead of Stena Lynx III, writes Jehan Ashmore.
It was originally planned that the 4,113grt 'Lynx' craft would start the season while the 19,638grt HSS (High Speed Service) fast-craft would take over in June for the summer months.

According to Stena Line over 70% of its passengers business is carried by the HSS Stena Explorer in the high season. It is felt that the 1996 Finnish built fast-craft is better suited for the service due to a loyal customer base which was reflected by repeat bookings and their preference of the HSS craft on the 120 minute (2 hour) route.

A daily single round trip is scheduled with sailings from Dun Laoghaire to Holyhead departing at 13:15hrs. The corresponding sailing from the Anglesey port departs at 10.00hrs and arrives at the Irish port at 12 noon. Sailings will operate through the summer until 13 September.

From there on Stena will make a decision as to its continuing schedule, though it is widely believed that the prospects of the fuel-thirsty, expensive to run HSS fast-craft service are likely to be at an end of an era.

Last month negotiations over the core issue of harbour fees were held between Stena Line and Dun Laoghaire Harbour Company. It is understood that the annual fee of €6.5m was dropped to €2m. The board of the harbour company has given a 'conditional green light' of a new ferry contract to Stena Line to run the service for the next two years with an option of a third year.

The service closed for its seasonal break earlier this year on 5 January with the 'Lynx' going into temporary lay-up at Holyhead's inner harbour to join the HSS Stena Explorer. The HSS had been 'wintering' at the port since September sailings were taken over by the Lynx.

Earlier this month the Stena Lynx III came to Dun Laoghaire to continue her lay-up period. The 1996 Tasmanian built craft will stay there before resuming seasonal sailings between Rosslare-Fishguard in tandem with the conventional ferry Stena Europe.

In the meantime the craft is berthed at the harbour's two-berth ferry terminal at St. Michaels Wharf. The HSS berth is only designed for this type of fast-craft whereas the other berth now occupied by the Lynx was built originally for conventional ferries but was re-configured last year to suit the fast-craft.

Published in Ferry

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.