Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Product Recall

The Department of Transport has been made aware of a Safety Recall Notice for AWG fire hose nozzles by the EU Commission’s Safety Gate rapid alert system.

The affected nozzles are type HS 10, HS 12, HS 16 and HS 20, country of origin Germany, marked with batch number “EN15182-1/3 2015” on the nozzle cap and “55” marked inside the orange tube.

They were most likely supplied during weeks 24 to 37 in
2015.

According to the EU notice, the product is defective and does not comply with the requirements of the Marine Equipment Directive or with the European Standard EN 15182- 1.

The notice adds that the nozzle is not robust enough to withstand working pressure of 16 bar and may burst. As a result, the user may be injured due to bursting or suffer burns when extinguishing a fire.

For more details on the safety recall, see Marine Notice No 81 of 2023 attached below.

Published in Safety

The Department of Transport advises that the manufacturer Paroc Group Oy, a subsidiary of Owens Corning, has issued a product safety recall for certain forms of deck and bulkhead insulation that it produces.

This recall follows independent testing where it was found that the products failed to meet the requirements for the respective Marine Equipment Directive 2014/90/EU (MED) fire integrity tests.

It is understood that the supply of these products in newbuild ships in Ireland has been limited but it is possible that it may have been installed by third-party suppliers for repair and modification purposes.

If you have non-installed stock of Paroc Marine’s Navis Mat, Navis Slab and Navis Wired Mat insulation products, as detailed in Marine Notice No 72 of 2023 attached below, please inform Paroc as soon as possible.

If any such product is installed on board a vessel, the supplier should be contacted and a remedial action plan agreed with the Marine Survey Office as a matter of urgency.

Any queries in relation to this Marine Notice should be addressed to [email protected].

Published in News Update

The UK’s Office for Product Safety & Standards have announced the recall of a popular lifejacket over safety concerns.

The product, which was sold via Amazon as Life Jacket 150N, has been identified as presenting a serious risk of drowning to the user if relied upon as protection in the water.

Amazon has since removed the product listing from its online marketplace and the OPSS is requiring the recall of the product from end users.

Owners of the above product are advised to visit the Product Safety Alerts, Reports and Recalls page on the GOV.UK website for further information and next steps.

Published in Water Safety

The UK’s Office for Product Safety and Standards has announced a product recall for 11 models of lifejackets sold via online retailer Amazon over safety concerns.

Officials confirm that the affected products were not supplied with the required compliance documentation or markings to demonstrate that they have been adequately conformity assessed.

The models of lifejackets purchased by users via Amazon are those with the following brand names: NILIPEI, FLOATTOP, LIXONG, ROSOAMY, GRELANT, AJING, ZENING, STECTO, OMOUBOI, WELLPATH and Rrtizan.

The products do not meet the requirements of the PPE Regulation 2016/425 and as such, the Office for Product Safety and Standard recommend that owners stop using these products immediately. Owners are also recommended to contact the distributor to request redress.

For further information and product details, visit the GOV.UK website.

Published in Water Safety

#Recall - The UK's Maritime and Coastguard Agency (MCA) has issued a recall notice for certain models of Safetmade hydrostatic release units (HRUs).

While these HRUs have been approved as having a service life of three years, investigations have shown that some units suffered water ingress, causing corrosion leading to their malfunction under normal conditions.

The affected models are the Safetmade LR-1 and EP-1, and owners are advised to return any such units to their nearest service station or port where they can be exchanged for an equivalent HRU up till 1 September 2016.

The MCA's Safety Bulletin No 6 of 2016 has more HERE.

Published in Water Safety

RC35 Class

The concept of the RC35 Class is to bring together similar boats within a close handicap banding and to work with owners and crews to develop the best racing experience possible on the Clyde and the Irish Sea area. The Class is within a tight rating band (IRC 1.015-1.040) yacht racing will be in Scotland, Ireland and Wales.

Q: What is the RC35 ‘Rule’?
A: Qualifying yachts for the RC35 Class will sit within an IRC Banding of 1.015 to 1.040. In 2017 it is proposed that a tolerance of +/- 0.05pts will be permitted

Q: Are there any other criteria?
A: RC35 takes the most prevalent IRC racing boats on the Clyde and groups them within a fixed rating band. Qualifying boats will have an LOA 32ft—38ft and displacement of between 3,000kg—9,000kg. The rule also requires boats conform to ISAF Cat.4 be anti-fouled and not dry sailed. A limit of sail purchases (2 per year) also applies.

Q: What is the RC35 Championship?
A: The RC35 Championship will cover 8 events (6 to count) and include events such as Scottish Series, Dun Laoghaire/Bangor and an RC35 Championship weekend. Each year the Class will make a commitment to one ‘away’ regatta as part of the Championship.