Displaying items by tag: Green WIN

23rd September 2023

Grand Canal: Device Installation for Green WIN Project at Shannon Harbour

Waterways Ireland advises all masters of vessels on and users of the Grand Canal that as part of the Green WIN project (more HERE), new deep well and flow devices are to be installed at Locks 35 and 36 at Shannon Harbour.

These works are due to begin Monday 25 September and will continue for around eight weeks, until mid-to-late November.

The works are land-based and navigation through the locks will not be affected, the cross-border body for Ireland’s inland waterways adds.

Published in Inland Waterways

Tagged under

Waterways Ireland Partners With European ‘Green WIN’ Project

Waterways Ireland is involved with the European project Green WIN, which aims to address excess energy use and high carbon emissions generated by pumping equipment and systems to keep waterways operational.

This project is funded under Priority 2 ‘Low Carbon’ of the European Regional Development Fund Interreg North-West Europe 2014-2020 and is led by Canal and River Trust (UK).

The other project partners are Ministerie van Infrastructuur en Waterstaat (NL), Université of Liège (BE), Voies Navigables de France (FR) and Vlaamse Landmaatschappij (BE).

The project aims to use trials of low-carbon water pumping technologies, systems or processes to show north-west European water management organisations how energy consumption and CO2 emissions for such operations can be significantly reduced.

From these trials, and by demonstrating a methodical approach that can be used after the project is complete, Green WIN aim to achieve 15% energy savings and CO2 reductions at 11 trial sites in Ireland, the UK and France by 2021, reducing energy use by 778,000 kWh and CO2 emissions by 195 tonnes.

Main outputs and pilots will be an infrastructure audit, technology trials, investment, procurement and business planning guidelines (a Greener Pumping Technologies Toolkit) and an established support network.

Green WIN will roll these out to other water management organisations by encouraging them to carry out new installations as their existing equipment reaches end of life.

The project will also aim to influence change in behaviours as well as legislation to reach a greater take up of greener technologies, lower energy usage, reduced emissions and more organisations involved in taking forward the technologies demonstrated in the project.

For more information on the project, visit the GreenWIN website.

Published in Inland Waterways

Tagged under

Beneteau 31.7 sailing in Ireland

In Ireland, the Beneteau First 31.7 Ireland One Design Class Association encourages and develop the use of the Beneteau First 31.7 yacht as a one-design keelboat, mainly for racing.

Each year the association stages national championships with boats coming from different sailing across Ireland. The main centre is Dun Laoghaire Harbour where the bulk of the fleet (15 boats) are based at the National Yacht club but are moored at Dun Laoghaire Marina.

The Beneteau 31.7 boat is not new to Dublin Bay, as boats of this size and type have competed in DBSC in the Cruiser 2 class for some years.

However during the 2006 season, due to their increased numbers, DBSC granted the class its own racing start, thereby facilitating one-design racing for this cruiser/racer.

Since then it has become one of the biggest one-design keelboat classes on the Bay.

One-design rules were drawn up to discourage modifications, maintain a level playing field and set a generally ‘Corinthian’ ethos.

To preserve the cruising dimension, the boat races with cushions aboard.

Numbers entered in DBSC have settled down to approx 15-18 boats, and regular Thursday and Saturday attendances over the season are usually of the order of 14 to 16 boats, reflecting good participation by members. Racing is close and competitive.

In addition to scratch results, ECHO results are also posted. This combines the best of both worlds, providing one-design racing which the members like, while also providing an incentive and interest in turning out for those boats who may not always approach podium position on scratch.

At A Glance – Beneteau First 31.7 Specifications

L.O.A 9.61 m
Hull length 9.50 m
L.W.L. 8.80 m
Beam 3.23 m
Draught min (Deep draught keel) Cast iron 1.90 m
Ballast weight (Deep draught keel) 1 025 kg
Air draught (max) 13.90 m
Light displacement (EC) 3 750 kg
Fuel capacity 30 l
Freshwater capacity 160 l
Engine power 21 HP