Menu

Ireland's sailing, boating & maritime magazine

AfloatDigi 2018 CHMarine SafetySection

Displaying items by tag: Ben Eadar

Three Voith-Schneider tugs that are surplus to the requirements of the Dublin Port Company towage fleet are for sale, writes Jehan Ashmore.
Two of the three tugs, Deilginis and Cluain Tarbh that are painted in a cream and black livery scheme, can be seen berthed at the North Wall Extension, close to the East-Link toll-lift bridge. Moored alongside them are their green hulled replacements.

The smallest of the tugs for sale is the 17-tonnes bollard pull Ben Eadar (1972/198grt) which was built by Richard Dunston (Hessle) Ltd. She is berthed elsewhere in the port alongside the former Dundalk Port Company owned dredger Hebble Sand, which too has been recently put up for sale. For more information about the grab-hopper dredger click HERE.

Ben Eadar was decommissioned in 2009 and her 35-tonnes bollard-pull fleetmates Cluain Tarbh (1991/268grt) built by McTay Marine of Bromborough and Deilginis (1996/335grt) remained in service until late last year.

Of the trio Deilginis is the last tug commissioned by the Dublin Port & Docks Board (DP&DB) and the 30m tug is also the last to carry a traditional naming theme based on Dublin Bay coastal suburbs spelt in Irish. Deilginis is the Irish for Dalkey, Cluain Tarbh is for Clontarf and Ben Eadar is a translation for Howth.

Deilginis was launched from Astilleros Zamakona S.A. in Bilbao, the same Spanish shipyard that was commissioned by the Dublin Port Company to build two 50-tonnes bollard pull tractor tug sisters. The first newbuild Shackleton entered service late last year and she was followed by Beaufort in early 2010. In March of that year the tugs that cost €6m each to build were officially named in a joint ceremony.

Published in Dublin Port

Every Year Ireland's Search & Rescue Services deliver emergency life saving work on our seas, lakes and rivers.

Ireland's Water Safety Agencies work hard to provide us with the information we need to keep safe, while enjoying all manner of water based activities.

There's no better fun than getting out on the water but being afloat is a responsibility we all need to take seriously.

These pages detail the work of the rescue agencies. We also aim to promote safety standards among pleasure boaters, and by doing so, prevent, as far as possible, the loss of life at sea and on inland waters. If you have ideas for our pages we'd love to hear from you. Please email us at [email protected]

Think Before You Sink - Wear a Lifejacket

Accidents can happen fast on water and there may not be time to reach for a lifejacket in an emergency therefore don't just carry a lifejacket - wear it; if it's not on you, it can't save your life.

Irish Water Safety's Safe Boating Alert:

Check condition of boat and equipment, hull, engine, fuel, tools, torch.

Check the weather forecast for the area.

Check locally concerning dangerous currents and strong tides.

Do not drink alcohol while setting out or during your trip.

Carry an alternative means of propulsion e.g. sails and oars or motor and oars.

Carry a first aid kit on board and distress signals (at least two parachute distress rockets, two red hand flares).

Carry a fire extinguisher, a hand bailer or bucket with lanyard and an anchor with rope attached.

Carry marine radio or some means of communication with shore.

Do not overload the boat - this will make it unstable.

Do not set out unless accompanied by an experienced person.

Leave details of your planned trip with someone ashore - including departure and arrival times, description of boat, names of persons on board, etc.

Wear a Lifejacket at all times.

Keep an eye on the weather - seek shelter in good time.

In Marine Emergencies, call 999 or 112 and ask for Marine Rescue.

Lifejackets Checklist

Ensure Cartridges have not been punctured and are secured firmly.

Ensure all zips, buckles, fasteners and webbing straps are functioning correctly and adjusted to fit the user.

Check that fitted lights are operating correctly.

Ensure that Automatic Inflation devices are fully serviced and in date.

Check that the valve or lifejacket is not leaking.