Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Brownstown Head

#MCIB - Various factors - including poor buoyancy, suboptimal lifejackets and a fateful late decision to swim to shore - have been identified in the official report into the death of a fisherman off the Waterford coast earlier this year.

As previously reported on Afloat.ie, a major search and rescue operation was launched on 10 January when a 16-foot fishing punt capsized in a strong swell at the sandbar off Brownstown Head near Dunmore East, throwing its two-man crew overboard.

James Tate was able to swim to the nearby shore in the early morning darkness after some two hours in the water. But he became separated from his friend Johnny Flynn - a former member of the Dunmore East lifeboat crew - who was found unconscious in the water by coastguard helicopter before 8.30am.

Flynn was pronounced dead at Waterford Airport shortly after, with a post-mortem concluding that he cause of death was drowning.

The tragedy occurred six years to the day after the sinking of Dunmore East trawler the Pere Charles, which took five lives.

In the official report into the incident, the Marine Casualty Investigation Board (MCIB) found that the fishing punt, already vulnerable to breaking waves as an un-decked open boat, was more susceptible due to its waterlogged condition, and the lack of adequate buoyancy.

It was also found that neither the vessel's handheld VHF radio nor GPS device, or indeed Tate's mobile phone, were available to the pair after the boat turned turtle.

Though both men were wearing lifejackets, they were of a kind that lacked a collar that would have kept the deceased's head above water, nor did they have a light or whistle. Only Tate was equipped with any kind of light, so he could not locate his friend in the dark.

Most importantly, it was found that the boat had overturned within 100 metres of the shallows, so that if the pair had attempted to swim to shore earlier - rather than tire themselves out trying to climb onto the upturned hull - the chances of both men surviving the incident "would have been greatly enhanced".

The full report into the incident is available to download below.

Published in MCIB

Waszp sailing

The Waszp project was conceived in 2010 by Andrew McDougall, designer of the world-beating Mach 2 foiling Moth. 

The Waszp was created as a strict one-design foiler, where, as the class says “the true test when raced is between crews and not boats and equipment”.

The objective of the class rules is to ensure that this concept is maintained. Keeping possible modifications to a minimum ensures fair racing across the fleet, helps to reduce the overall cost to the sailor and reduces the amount of time in the workshop. 

The popularity of the WASZP has proven that the boat and the concept work. In October 2021, 1237 boats had been sold to over 45 countries. 

The top speed recorded on the foiling dinghy is 26.7 knots. 

60-95kgs+ is a weight range competitive across varied conditions with rigs knowns as ‘8.2’ and ‘6.9’.

The cost of a Moth dinghy in Europe is €14,400 inc VAT + shipping according to the manufacturers in October 2021.