Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: wiring

Problems with electrical wiring had been alerted to a retired mariner who drowned along with two friends after abandoning their boat due to a fire, an inquest into the tragedy has heard.
Wolfgang Schmidt (70), Richard Harmon (69) and Wolfgang Schröder (62) all died from drowning near Adrigole Harbour in Bantry Bay on 16 August 2010 after a fire broke out on Schmidt's boat during an angling trip.
The Irish Times reports that shipwright John Murphy told the inquest that he undertook repairs to the engines and fuel tank of the small cruiser in May 2010.
He said he expressed concerns about the state of the boat's wiring to Schmidt, who told him he planned to sell the boat later in the year and would return to him to tidy the wiring before then.
The inquest heard that the wiring was connected directly to the battery without an isolation switch or fuse board, which had compounded the problem when fire broke out and made the vessel unrecoverable.
Lone survivor Ed Dziato (47) told how they had twice tried to put out the fire with a powder extinguisher but both times the flames shot back up. They were unable to reach the lifejackets stored forward of the wheelhouse, which was quickly engulfed by flames.
In all three cases the coroner returned verdicts of accidental death due to drowning.
The Irish Times has more on the story HERE.

Problems with electrical wiring had been alerted to a retired mariner who drowned along with two friends after abandoning their boat due to a fire, an inquest into the tragedy has heard.

Wolfgang Schmidt (70), Richard Harmon (69) and Wolfgang Schröder (62) all died from drowning near Adrigole Harbour in Bantry Bay on 16 August 2010 after a fire broke out on Schmidt's boat during an angling trip.

The Irish Times reports that shipwright John Murphy told the inquest that he undertook repairs to the engines and fuel tank of the small cruiser in May 2010. 

He said he expressed concerns about the state of the boat's wiring to Schmidt, who told him he planned to sell the boat later in the year and would return to him to tidy the wiring before then.

The inquest heard that the wiring was connected directly to the battery without an isolation switch or fuse board, which had compounded the problem when fire broke out and made the vessel unrecoverable.

Lone survivor Ed Dziato (47) told how they had twice tried to put out the fire with a powder extinguisher but both times the flames shot back up. They were unable to reach the lifejackets stored forward of the wheelhouse, which was quickly engulfed by flames.

In all three cases the coroner returned verdicts of accidental death due to drowning.

The Irish Times has more on the story HERE.

Published in News Update

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.