Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Big Lift

Three huge cranes which left Cork Harbour at the end of August have arrived at their final destination the New York area, as RTÉ News reports.

Tom MacSweeney covered the three Limerick-built cranes upon their departure from Port of Cork on board the Big Lift Baffin for their transatlantic journey.

As our own Jehan Ashmore previously wrote, the three 150m ship-to-shore (STS) Liebherr cranes represent the largest single objects ever engineered in Ireland.

Logistics for transporting the massive ‘megamax’ cranes were complicated by the presence of the Bayonne Bridge connecting New York and New Jersey, which has a clearance less than half that of their fully assembled height.

But the Big Lift successfully passed the bridge on schedule on Saturday afternoon (10 September) and the cranes will now be installed at Maher Terminals at Port Newark in New Jersey.

RTÉ News has more on the story HERE.

Published in Port of Cork

Crowds lined the Riverside from Monkstown to Cobh in Cork Harbour this afternoon as the Big Lift Baffin left Cork Dockyard with three heavy lift cranes aboard bound for New York.

Two Cork Port tugs assisted the ship leaving the Dockyard. It went astern out to the centre of Monkstown Bay and was then turned bow on to leave the harbour down past Cobh, Whitegate and Roche"s Point for the ten-day voyage to the US.

Big Lift heading for sea and New YorkBig Lift heading for sea and New York

For more read Afloat's earlier report on the Big Lift Baffin here

Crowds watching Big Lift Baffin depart Cork DockyardCrowds watching Big Lift Baffin depart Cork Dockyard

Bob Bateman's Big Lift Photo Gallery Below

Published in Port of Cork

About the TP52 Racing Yacht

The TP52 racing yacht is a remarkable example of cutting-edge technology in the world of competitive yachting. Measuring 52 feet (15.85 metres) in length, this vessel is constructed entirely from carbon fibre, making it an incredibly light and agile craft.

The TP52 features a 6.25-metre high rig, complete with a fractional asymmetrical spinnaker and a self-tacking jib. This design reduces the workload of the crew, allowing for more efficient manoeuvres and freeing up the crew to focus on the mainsheet upwind and on two-sail reaches.

The spinnaker rigging set-up, measuring 15.00 m2, presents a challenge to even the most experienced crews, requiring them to be fit and perfectly coordinated. Maneuvering the boat requires athleticism due to the vessel's lack of inherent stability and the high speed generated by the fully battened mainsail and jib.

The TP52's hull is constructed of fibreglass-reinforced polyester in a foam sandwich layout, resulting in a weight of just 74kg. The fully battened mainsail and jib are made from a transparent Mylar laminate with orange or red Dacron trimming, while the spinnaker is manufactured from ripstop Nylon.

The mast is made up of three parts, featuring an aluminium bottom and middle section, with a polyester-fibreglass composite tip to increase mast bend and decrease overall weight. The capsizing moment, which can be generated by a heavy mast tip, is also reduced through this design. The TP52's foils are constructed from either aluminium or fibreglass, depending on the specific requirements of the vessel.

Overall, the TP52 racing yacht is an exceptional example of the latest advancements in yacht design and technology. Its lightweight construction, advanced rigging, and high-speed capabilities make it a top contender in the world of competitive yachting, challenging even the most skilled and experienced crews.