Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Butt of Lewis

A breach in the engine compartment caused the fishing vessel Ainmire to take on water and sink off the coast of Scotland in April last year, according to the official report into the incident.
All crew on board the vessel were transferred safetly to another fishing boat that responded to its distress call, some 30 miles northwest of the Butt of Lewis on the morning of 29 April 2010.
The Marine Casualty Investigation Board (MCIB) report concluded that the failure of a sea water cooling pipe in the engine room was the most likely cause of the flooding, and pointed to the fact that the pipework had not been renewed during the life of the vessel.
It was also noted that the bilge pump and its motors were located under the floor plates in the engine room, and thus were inoperable when the water level had risen in the compartment.
In addition, the MCIB report found that the Ainmire has been operating without a Fishing Vessel Safety Certificate for more than six months at the time of the incident.
Though the owner had submitted a survey application and paid the required fee to the Marine Survey Office (MSO) the previous summer, a communication breakdown resulted in the required survey not being carried out before the expiration of the vessel's previous certification.
The MCIB advised boat owners and operators to be extra vigilant regarding the location of bilge pumps in their vessels.
It also warned that survey applications for certification "may not accommodate all situations", and that the issuing of a recepit is not a guarantee that an application is being dealt with.
The full report is available to download as a PDF from the MCIB website HERE.

A breach in the engine compartment caused the fishing vessel Ainmire to take on water and sink off the coast of Scotland in April last year, according to the official report into the incident.

All crew on board the vessel were transferred safetly to another fishing boat that responded to its distress call, some 30 miles northwest of the Butt of Lewis on the morning of 29 April 2010.

The Marine Casualty Investigation Board (MCIB) report concluded that the failure of a sea water cooling pipe in the engine room was the most likely cause of the flooding, and pointed to the fact that the pipework had not been renewed during the life of the vessel.

It was also noted that the bilge pump and its motors were located under the floor plates in the engine room, and thus were inoperable when the water level had risen in the compartment.

In addition, the MCIB report found that the Ainmire has been operating without a Fishing Vessel Safety Certificate for more than six months at the time of the incident.

Though the owner had submitted a survey application and paid the required fee to the Marine Survey Office (MSO) the previous summer, a communication breakdown resulted in the required survey not being carried out before the expiration of the vessel's previous certification.

The MCIB advised boat owners and operators to be extra vigilant regarding the location of bilge pumps in their vessels. 

It also warned that survey applications for certification "may not accommodate all situations", and that the issuing of a recepit is not a guarantee that an application is being dealt with.

The full report is available to download as a PDF from the MCIB website HERE.

Published in MCIB

Beneteau 211 sailing in Ireland

A small, fast cruiser/racer – in style very much a miniature Open 60 or early Figaro, the Beneteau First 211 offers high sailing performance for her size, plus simple accommodation for up to four people.
The boat is very dinghy-style to sail, although the keel makes her self-righting, and foam buoyancy renders her unsinkable, according to the French manufacturer.

Designed by Groupe Finot and introduced in 1998 as a replacement model for the 1992 model First 210, the Beneteau First 211 is a small high-performance yacht designed to be simple to sail and take the ground or be trailed. The words' pocket rockets' tend to be used to describe these boats!
The design was revised to become the Beneteau First 21.7 in 2005. All three models, 210, 211 and 21.7, are very similar in style and concept and share many actual components.

The hull of the Beneteau First 211 is solid GRP, with sandwich construction for the deck moulding. There is foam buoyancy at the bow and stern, guaranteeing unsinkability. The ballasted drop keel is raised by a manual jack and allows easy transport of the boat and drying out if required, supported level by the twin rudders.
The sailplan has a non-overlapping jib to keep sheet loads down and a large spinnaker to achieve high speeds downwind. With almost six foot of draught with keel down and twin rudders for control, upwind performance is also excellent.

The design is popular in Ireland's boating capital at Dun Laoghaire Harbour, where up to a dozen race as part of a one-design class in regular Dublin Bay Sailing Club racing. The boats also race for national championship honours annually. The boats are kept on Dun Laoghaire Marina and look all the more impressive as the fleet of pocket rocket racers are all moored together on one pontoon.

At A Glance – Beneteau First 211 Specifications

LOA: 6.2m (20ft 4in)

Draught: 1.8m to 0.65m (5ft 11in to 2ft 2in)

Displacement: 1,100kg (2,200lb)

LWL: 6m (19ft 7in)

ARCHITECT
• Finot Conq et Associés

Featured Sailing School

INSS sidebutton

Featured Clubs

dbsc mainbutton
Howth Yacht Club
Kinsale Yacht Club
National Yacht Club
Royal Cork Yacht Club
Royal Irish Yacht club
Royal Saint George Yacht Club

Featured Brokers

leinster sidebutton

Featured Webcams

Featured Associations

ISA sidebutton
ICRA
isora sidebutton

Featured Marinas

dlmarina sidebutton

Featured Chandleries

CHMarine Afloat logo
https://afloat.ie/resources/marine-industry-news/viking-marine

Featured Sailmakers

northsails sidebutton
uksails sidebutton
watson sidebutton

Featured Blogs

W M Nixon - Sailing on Saturday
podcast sidebutton
BSB sidebutton
wavelengths sidebutton
 

Please show your support for Afloat by donating