Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: Marine Casualty Investigation Board

A Marine Casualty Investigation Board (MCIB) report into the death of Mr. Alain Adler after the six metre boat in he which he travelling capsized from a pier in West Cork in 2008 has found there was no single cause for this casualty. It was the accumulation of several poor decisions which resulted in the capsize of the vessel and related fatality. The post mortem found that Mr. Alder died as a result of acute cardio-respiratory failure and drowning associated with hypothermia.

In the early hours of 5th December 2008, ten people set off from Colla Pier near Schull, Co. Cork in an open boat (with sealed deck) powered by a 30 HP outboard engine to spend the weekend on Coney Island, which lies about one kilometre off the coast of Cork, in the south west of Ireland.

Shortly afterwards the boat capsized resulting in the death of Mr. Alain Adler.  The post mortem found that Mr. Adler died as a result of acute cardio-respiratory failure and drowning associated with hypothermia.

The report also concludes that although several members of the group were familiar with boats and the dangers of the sea, none wore the lifejackets/PFD's provided.

The full MCIB report is downloadable below.mcib

Published in MCIB
Page 8 of 8

Shipyards

Afloat will be focusing on news and developments of shipyards with newbuilds taking shape on either slipways and building halls.

The common practice of shipbuilding using modular construction, requires several yards make specific block sections that are towed to a single designated yard and joined together to complete the ship before been launched or floated out.

In addition, outfitting quays is where internal work on electrical and passenger facilities is installed (or upgraded if the ship is already in service). This work may involve newbuilds towed to another specialist yard, before the newbuild is completed as a new ship or of the same class, designed from the shipyard 'in-house' or from a naval architect consultancy. Shipyards also carry out repair and maintenance, overhaul, refit, survey, and conversion, for example, the addition or removal of cabins within a superstructure. All this requires ships to enter graving /dry-docks or floating drydocks, to enable access to the entire vessel out of the water.

Asides from shipbuilding, marine engineering projects such as offshore installations take place and others have diversified in the construction of offshore renewable projects, from wind-turbines and related tower structures. When ships are decommissioned and need to be disposed of, some yards have recycling facilities to segregate materials, though other vessels are run ashore, i.e. 'beached' and broken up there on site. The scrapped metal can be sold and made into other items.