Menu

Ireland's sailing, boating & maritime magazine

Displaying items by tag: NTFM Syra 18

Besides the strong third-place showing by David Kenefick on Lake Garda a week ago, International Foiling Week also saw the launch of a new two-person foiling dinghy.

The NTFM Syra 18 is the brainchild of America’s Cup winners Niels Frei and Yves Detrey, and is being touted as the first double-handed monohull foiling dinghy.

Its design concept hinges on a canting T-foil system, and an innovative hybrid monohull shape to keep the boat stable at low speeds and in no-foiling mode. The aim is to dispel the notion that foiling is technically demeaning and carries higher risk than traditional sailing.

Indeed, its creators say the design’s key principles (see below) will ensure that the NTFM Syra 18 will be accessible to the widest possible range of sailors through its combination of simplicity, versatility and stability with blistering performance potential.

Syra18 02

The team behind the NTFM Syra 18 have been sailing all their lives and have impeccable credentials. Nils Frei and Yves Detrey are two-time America’s Cup winners with Alinghi, and have competed consistently at the highest level on the D35 and GC32 circuits.

“I have been addicted to foiling ever since my first flight,” Nils says. “There are two aims with the NTFM Syra 18: to offer the best experience of foiling flight to the widest possible range of sailors regardless upon experience and ambition; and, to produce a boat suitable for Olympic competition.

“We are fortunate to have been supported in our ambitions by our partners Isabelle Rinsoz and Publiaz, both of whom have been real assets.”

Yves adds: “When we first hatched the idea, we knew we had to prove the concept before launching in the marketplace and to make sure our aims were realistic. We wanted buyers to have the best possible experience from the moment of purchase and for the boat to have the potential to enhance sailing at the Olympics.

“We are close to reaching that point and are looking forward to getting the first production boats in the water.”

The initial design drawings for the NTFM Syra have been produced by VMG Yacht Design in Lausanne. And the first boat to be launched will be named SYRA by Publiaz, after NTFM’s main partner.

The boat will be tested and optimised, taking part in some classic races primarily in the western part of Switzerland where Publiaz has its main business focus. Thanks to Publiaz’s engagement, NTFM Syra will be able to prepare the launch of the production models in an optimal manner.

Key Design Principles

Safety
The hybrid hull shape means to boat is stable at low speed and in no-foiling mode, making leaving and returning to shore a safe proposition in light or even gusting conditions. With one central T-foil in the water, there are no sharp, trailing edges above deck-height reducing the risk of physical harm. The double rudder configuration adds stability and their position beneath the hull wings greatly reduces the risk of injury when falling overboard. Finally, the hull shape and foil configuration offer a number of set-ups which will enable the NTFM Syra 18 to be sailed by a broad range of experience, weight and age. While the most experienced will be ready to foil straight off the beach, less-experienced sailors will be able to grow into the boat taking steps that increase speed and excitement as and when they are ready.

Efficiency
The hybrid monohull shape is low-drag and the deck-sweeper mainsail is highly efficient. The main canting T-foil and the double rudder system, which offers the possibility to apply differential, means significant righting-moment with or without use of the optional trapeze. Dynamic adjustment of the main T-foil makes depowering sails in gusts unnecessary. Trimming the foil allows power to be kept on, promoting acceleration on a stable, reassuring platform. Flight height is regulated by a proven mechanical wand system. Changeable foil tips promote optimisation in a range of conditions and the single central foil makes tacking and gybing straight-forward. Mainsheet location is behind the deck sweeper and the curved traveller rail will allow for easy trimming. The set-up is completed by a self-tacking, furling Code 0.

User-friendly
The NTFM Syra 18 is highly versatile, offering safe, efficient sailing in a wide range of wind conditions for a broad spectrum of sailors. Waterproof pockets and deck window to see foil operation enhance the experience. Launch and recovery are facilitated the retractable rudders and main foil. Foldable wings minimise boat park requirements and mean the boat fits on a standard 2.20m-wide road trailer.

Published in Moth

About Dublin Port 

Dublin Port is Ireland’s largest and busiest port with approximately 17,000 vessel movements per year. As well as being the country’s largest port, Dublin Port has the highest rate of growth and, in the seven years to 2019, total cargo volumes grew by 36.1%.

The vision of Dublin Port Company is to have the required capacity to service the needs of its customers and the wider economy safely, efficiently and sustainably. Dublin Port will integrate with the City by enhancing the natural and built environments. The Port is being developed in line with Masterplan 2040.

Dublin Port Company is currently investing about €277 million on its Alexandra Basin Redevelopment (ABR), which is due to be complete by 2021. The redevelopment will improve the port's capacity for large ships by deepening and lengthening 3km of its 7km of berths. The ABR is part of a €1bn capital programme up to 2028, which will also include initial work on the Dublin Port’s MP2 Project - a major capital development project proposal for works within the existing port lands in the northeastern part of the port.

Dublin Port has also recently secured planning approval for the development of the next phase of its inland port near Dublin Airport. The latest stage of the inland port will include a site with the capacity to store more than 2,000 shipping containers and infrastructures such as an ESB substation, an office building and gantry crane.

Dublin Port Company recently submitted a planning application for a €320 million project that aims to provide significant additional capacity at the facility within the port in order to cope with increases in trade up to 2040. The scheme will see a new roll-on/roll-off jetty built to handle ferries of up to 240 metres in length, as well as the redevelopment of an oil berth into a deep-water container berth.

Dublin Port FAQ

Dublin was little more than a monastic settlement until the Norse invasion in the 8th and 9th centuries when they selected the Liffey Estuary as their point of entry to the country as it provided relatively easy access to the central plains of Ireland. Trading with England and Europe followed which required port facilities, so the development of Dublin Port is inextricably linked to the development of Dublin City, so it is fair to say the origins of the Port go back over one thousand years. As a result, the modern organisation Dublin Port has a long and remarkable history, dating back over 300 years from 1707.

The original Port of Dublin was situated upriver, a few miles from its current location near the modern Civic Offices at Wood Quay and close to Christchurch Cathedral. The Port remained close to that area until the new Custom House opened in the 1790s. In medieval times Dublin shipped cattle hides to Britain and the continent, and the returning ships carried wine, pottery and other goods.

510 acres. The modern Dublin Port is located either side of the River Liffey, out to its mouth. On the north side of the river, the central part (205 hectares or 510 acres) of the Port lies at the end of East Wall and North Wall, from Alexandra Quay.

Dublin Port Company is a State-owned commercial company responsible for operating and developing Dublin Port.

Dublin Port Company is a self-financing, and profitable private limited company wholly-owned by the State, whose business is to manage Dublin Port, Ireland's premier Port. Established as a corporate entity in 1997, Dublin Port Company is responsible for the management, control, operation and development of the Port.

Captain William Bligh (of Mutiny of the Bounty fame) was a visitor to Dublin in 1800, and his visit to the capital had a lasting effect on the Port. Bligh's study of the currents in Dublin Bay provided the basis for the construction of the North Wall. This undertaking led to the growth of Bull Island to its present size.

Yes. Dublin Port is the largest freight and passenger port in Ireland. It handles almost 50% of all trade in the Republic of Ireland.

All cargo handling activities being carried out by private sector companies operating in intensely competitive markets within the Port. Dublin Port Company provides world-class facilities, services, accommodation and lands in the harbour for ships, goods and passengers.

Eamonn O'Reilly is the Dublin Port Chief Executive.

Capt. Michael McKenna is the Dublin Port Harbour Master

In 2019, 1,949,229 people came through the Port.

In 2019, there were 158 cruise liner visits.

In 2019, 9.4 million gross tonnes of exports were handled by Dublin Port.

In 2019, there were 7,898 ship arrivals.

In 2019, there was a gross tonnage of 38.1 million.

In 2019, there were 559,506 tourist vehicles.

There were 98,897 lorries in 2019

Boats can navigate the River Liffey into Dublin by using the navigational guidelines. Find the guidelines on this page here.

VHF channel 12. Commercial vessels using Dublin Port or Dun Laoghaire Port typically have a qualified pilot or certified master with proven local knowledge on board. They "listen out" on VHF channel 12 when in Dublin Port's jurisdiction.

A Dublin Bay webcam showing the south of the Bay at Dun Laoghaire and a distant view of Dublin Port Shipping is here
Dublin Port is creating a distributed museum on its lands in Dublin City.
 A Liffey Tolka Project cycle and pedestrian way is the key to link the elements of this distributed museum together.  The distributed museum starts at the Diving Bell and, over the course of 6.3km, will give Dubliners a real sense of the City, the Port and the Bay.  For visitors, it will be a unique eye-opening stroll and vista through and alongside one of Europe’s busiest ports:  Diving Bell along Sir John Rogerson’s Quay over the Samuel Beckett Bridge, past the Scherzer Bridge and down the North Wall Quay campshire to Berth 18 - 1.2 km.   Liffey Tolka Project - Tree-lined pedestrian and cycle route between the River Liffey and the Tolka Estuary - 1.4 km with a 300-metre spur along Alexandra Road to The Pumphouse (to be completed by Q1 2021) and another 200 metres to The Flour Mill.   Tolka Estuary Greenway - Construction of Phase 1 (1.9 km) starts in December 2020 and will be completed by Spring 2022.  Phase 2 (1.3 km) will be delivered within the following five years.  The Pumphouse is a heritage zone being created as part of the Alexandra Basin Redevelopment Project.  The first phase of 1.6 acres will be completed in early 2021 and will include historical port equipment and buildings and a large open space for exhibitions and performances.  It will be expanded in a subsequent phase to incorporate the Victorian Graving Dock No. 1 which will be excavated and revealed. 
 The largest component of the distributed museum will be The Flour Mill.  This involves the redevelopment of the former Odlums Flour Mill on Alexandra Road based on a masterplan completed by Grafton Architects to provide a mix of port operational uses, a National Maritime Archive, two 300 seat performance venues, working and studio spaces for artists and exhibition spaces.   The Flour Mill will be developed in stages over the remaining twenty years of Masterplan 2040 alongside major port infrastructure projects.

Source: Dublin Port Company ©Afloat 2020.